I got some clear decals made up for the interior wood appliques and the "S&S Masterpiece" badges on the exterior landau shield area. VERY tiny and hardly visible to the naked eye, but add a nice little detail.
Creating scale resin models of Professional Cars, including hearses, flower cars and ambulances.
Sunday, November 22, 2015
Sunday, November 15, 2015
Windshield and Window Work
I got some work done on the shape of the commercial glass side windows and their trim. Of course after creating the mold and resin cast, the windows can be cut out and fitted with clear windows.
Adding styrene plastic to the sides will give a structural shape visible through the "vinyl" top, the way the 1:1 version appears. I added a center crease to the rear door, but still have a lot of work to do on this with adding trim, door handle and vinyl treatment.
I was happy to get the commercial glass windshield formed (Thanks for the measurements, Brady!)
Next thing to do is finish the trim, rear door, coach lamps and "S&S Masterpiece" badges and then I can do the vinyl top! I got a lot of requests for Cobra grain, so that's what it'll be.
Sunday, November 8, 2015
Progress
I've now got the basic shapes of the top formed. I just need to cover the wood with clay (To imitate the Cobra top) and styrene for the windows.
I got a little work done with putting the trim on the upper door frames and making rollers for the casket floor.
I got a little work done with putting the trim on the upper door frames and making rollers for the casket floor.
Sunday, October 25, 2015
Creating a new top...
So, I've been working on making a new top for the car out of balsa wood. Just getting the profile right for now, but I'm going to visit a Masterpiece this week and get some more measurements for the windshield and roof. This balsa will only be used to create the OUTER part of the mold. After that a hollow cast can be made and once details are added to the inner part, I can make the inner mold.
Saturday, October 17, 2015
Decorative Interior Panel
More to come! I will try to post a new update every Saturday, so stay tuned...
Top Chop
In preparation for making a new raised roof on the coach, I finished chopping off the existing top. Along with the A and B-pillars:
The bubble wrap and tape were there to protect the parts I was not cutting.
Having joined the two car bodies together, I now had to cut a new line for the rear door and eliminate the seam.
I taped off the door handle and other parts I did not want to get body filler on and then sanded it all down smooth.
Spraying on some grey primer I was able to see what little imperfections there were and sand a little more.
The next thing to do is sculpt the basic shape of the upper part of the car in balsa wood and styrene. This will just be to create the outer portion of the mold around. After that, it can be discarded and the interior can be constructed.
Saturday, October 3, 2015
Two become ONE!
Then did the opposite for the "front donor" car.
Used a grinder to level the rear door handles...
And then used body filler to "erase" the rear doors all together.
After a little sanding...
I glued both halves into place on a steady board and put tape over the seams to keep the J-B Weld from oozing through to the visible side of the car.
After the epoxy sets, I'll use more bondo on the outside and cut a line for the the rear door.
Subscribe to:
Posts (Atom)